/*
 * Single-File-Header for SSD1306 SPI interface
 * 05-05-2023 E. Brombaugh
 */

#ifndef _SSD1306_SPI_H
#define _SSD1306_SPI_H

// control pins
#ifndef SSD1306_RST_PIN
#define SSD1306_RST_PIN PC2
#endif

#ifndef SSD1306_CS_PIN
#define SSD1306_CS_PIN PC3
#endif

#ifndef SSD1306_DC_PIN
#define SSD1306_DC_PIN PC4
#endif

#ifndef SSD1306_MOSI_PIN
#define SSD1306_MOSI_PIN PC6
#endif

#ifndef SSD1306_SCK_PIN
#define SSD1306_SCK_PIN PC5
#endif

#ifndef SSD1306_BAUD_RATE_PRESCALER
#define SSD1306_BAUD_RATE_PRESCALER SPI_BaudRatePrescaler_2
#endif

/*
 * init SPI and GPIO for SSD1306 OLED
 */
uint8_t ssd1306_spi_init(void)
{
    // Enable GPIOC and SPI
    RCC->APB2PCENR |= RCC_APB2Periph_SPI1;

    funGpioInitAll();
    funPinMode(SSD1306_RST_PIN, GPIO_CFGLR_OUT_50Mhz_PP);
    funPinMode(SSD1306_CS_PIN, GPIO_CFGLR_OUT_50Mhz_PP);
    funPinMode(SSD1306_DC_PIN, GPIO_CFGLR_OUT_50Mhz_PP);
    funPinMode(SSD1306_MOSI_PIN, GPIO_CFGLR_OUT_50Mhz_AF_PP);
    funPinMode(SSD1306_SCK_PIN, GPIO_CFGLR_OUT_50Mhz_AF_PP);

    funDigitalWrite(SSD1306_RST_PIN, FUN_HIGH);
    funDigitalWrite(SSD1306_CS_PIN, FUN_HIGH);
    funDigitalWrite(SSD1306_DC_PIN, FUN_LOW);

    // Configure SPI
    SPI1->CTLR1 =
        SPI_NSS_Soft | SPI_CPHA_1Edge | SPI_CPOL_Low | SPI_DataSize_8b |
        SPI_Mode_Master | SPI_Direction_1Line_Tx |
        SSD1306_BAUD_RATE_PRESCALER;

    // enable SPI port
    SPI1->CTLR1 |= CTLR1_SPE_Set;

    // always succeed
    return 0;
}

/*
 * toggle reset line
 */
void ssd1306_rst(void)
{
    funDigitalWrite(SSD1306_RST_PIN, FUN_LOW);
    Delay_Ms(10);
    funDigitalWrite(SSD1306_RST_PIN, FUN_HIGH);
}

/*
 * packet send for blocking polled operation via spi
 */
uint8_t ssd1306_pkt_send(const uint8_t *data, int sz, uint8_t cmd)
{
    if (cmd)
    {
        funDigitalWrite(SSD1306_DC_PIN, FUN_LOW);
    }
    else
    {
        funDigitalWrite(SSD1306_DC_PIN, FUN_HIGH);
    }

    funDigitalWrite(SSD1306_CS_PIN, FUN_LOW);

    // send data
    while (sz--)
    {
        // wait for TXE
        while (!(SPI1->STATR & SPI_STATR_TXE))
            ;

        // Send byte
        SPI1->DATAR = *data++;
    }

    // wait for not busy before exiting
    while (SPI1->STATR & SPI_STATR_BSY) {}

    funDigitalWrite(SSD1306_CS_PIN, FUN_HIGH);

    // we're happy
    return 0;
}

#endif