updated with code from the high branch

src/main.c

@@ -11,12 +11,6 @@
 
 #define F_CPU 3333333UL
 
-//These defines are mostly useful for when you want you editors LSP server to
-//function correctly.
-//#ifndef __AVR_ATtiny404__
-//#define __AVR_ATtiny404__
-//#endif
-
 //This can prevent issues with utils/delay.h library with the gcc toolchain
 #define __DELAY_BACKWARD_COMPATIBLE__
 
@@ -35,6 +29,16 @@
 //Set the function pointer for the delay func
 void (*Delay_MicroSeconds)(double us) = _delay_us;
 
+static void setEnablePinsHigh(void)
+{
+    //Pins 12, 6 and 7 are all set high.
+    PORTA.DIR |= (1<<2); //PA2= pin 12
+    PORTB.DIR |= (1<<2)|(1<<3); //PB2 = pin 7, PB3 = pin 6
+    
+    PORTA.OUT |= (1<<2);
+    PORTB.OUT |= (1<<2)|(1<<3);
+}
+
 int main(int argc, char **argv)
 {
     while(true){
@@ -42,20 +46,14 @@ int main(int argc, char **argv)
             ZCD_Poll();
             _delay_us(Tau);
             TriacOut_SetupPins();
-            TriacOut_SetAllHigh();
+            TriacOut_SetAllHigh();  //Only G1 exists in High power mode
             TriacOut_PulsePins(GatePulses[i]);
         }
         
-        //The G1-G3 pins are low at this point.
+        //The G1 pin is low at this point.
         _delay_ms(2500);
         ZCD_Poll();
-        TriacOut_SetupPins();
-        TriacOut_SetAllHigh();
-        
-        Load_HandleLoadPortA(ADC_LOAD1, 1);
-        Load_HandleLoadPortB(ADC_LOAD2, 3);
-        Load_HandleLoadPortB(ADC_LOAD3, 2);
-        
+        //setEnablePinsHigh();
         while(true){
             ;   //Do nothing until new Power cycle/reset occurs
         }