src/load/load.c

@@ -22,23 +22,21 @@
     #include "MockRegEdit.h"
 #endif
 
-
-
 //These two arrays allow us to track the A and B ports to know when
 //one has been disabled before.
 static bool porta_disabled[8] = {0};
 static bool portb_disabled[8] = {0};
 
-
 static bool valid_load(uint16_t val)
 {
-    if(val > LOWTHRESH && val < HIGHTHRESH) {
+    if(val > 527 && val < 1000) {
         return true;
     }
     return false;
 }
 
-static uint16_t sample_adc(uint8_t adc_pin)
+
+void Load_HandleLoadPortA(uint8_t adc_pin, uint8_t out_pin)
 {
     ADC_Init(adc_pin);
     ADC_Enable();
@@ -46,13 +44,6 @@ static uint16_t sample_adc(uint8_t adc_pin)
     uint16_t val = ADC_ReadValue(adc_pin);
     
     ADC_Disable();
-    return val;
-}
-
-void Load_HandleLoadPortA(uint8_t adc_pin, uint8_t out_pin)
-{
-    uint16_t val = sample_adc(adc_pin);    
-
     if(valid_load(val) && !porta_disabled[adc_pin]){
         RegEdit_SetBit((void *) &PORTA.DIR, out_pin);
         RegEdit_SetBit((void *) &PORTA.OUT, out_pin);
@@ -65,8 +56,12 @@ void Load_HandleLoadPortA(uint8_t adc_pin, uint8_t out_pin)
 
 void Load_HandleLoadPortB(uint8_t adc_pin, uint8_t out_pin)
 {
-    uint16_t val = sample_adc(adc_pin);    
-
+    ADC_Init(adc_pin);
+    ADC_Enable();
+    ADC_SetPin(adc_pin);
+    uint16_t val = ADC_ReadValue(adc_pin);
+        
+    ADC_Disable();
     if(valid_load(val) && !portb_disabled[adc_pin]){
         RegEdit_SetBit((void *) &PORTB.DIR, out_pin);
         RegEdit_SetBit((void *) &PORTB.OUT, out_pin);
@@ -76,11 +71,3 @@ void Load_HandleLoadPortB(uint8_t adc_pin, uint8_t out_pin)
         portb_disabled[adc_pin] = true;
     }
 }
-
-void Load_SoftResetDisabledLoads()
-{
-    for(int i = 0; i < 8; i++){
-        porta_disabled[i] = false;
-        portb_disabled[i] = false;
-    }
-}

src/load/load.h

@@ -10,45 +10,23 @@
 #ifndef LOAD_H
 #define	LOAD_H
 
-#include <stdint.h>
-
 /**
  * @brief Low Threshold
- * Anything below or equal to the value will cause the pin to lock into the disabled 
- * state.
+ *
  */
-#define LOWTHRESH 517 
+#define LOWTHRESH 527
 
 /**
  * @brief High Threshold
- * Anything equal or above the value will cause the pin to lock into the disabled
- * state.
+ *
  */
-#define HIGHTHRESH 830 
+#define HIGHTHRESH 1000
 
-
-/**
- * @brief Checks if the adc pin is inbetween LOWTHRESH and HIGHTHRESH and then
- * sets or disables the output pin on PORTA.
- * @param adc_pin the pin number that the load value is read from.
- * @param out_pin The pin that is set high if the adc_pin input is valid.
- */
 void Load_HandleLoadPortA(uint8_t adc_pin, uint8_t out_pin);
-
-
-/**
- * @brief Checks if the adc pin is inbetween LOWTHRESH and HIGHTHRESH and then
- * sets or disables the output pin on PORTB.
- * @param adc_pin the pin number that the load value is read from.
- * @param out_pin The pin that is set high if the adc_pin input is valid.
- */
 void Load_HandleLoadPortB(uint8_t adc_pin, uint8_t out_pin);
 
+void Load_HandlePinLoads(void);
 
-/**
- * @brief Resets the disabled array state.
- */
-void Load_SoftResetDisabledLoads(void);
 
 #endif	/* LOAD_H */
 

tests/CMakeLists.txt

@@ -9,7 +9,6 @@ add_subdirectory(RegEdit)
 add_subdirectory(simple_test)
 add_subdirectory(zero_cross_detection)
 add_subdirectory(TriacOut)
-add_subdirectory(load)
 
 
 # TEST_RUNNER
@@ -34,7 +33,6 @@ add_executable(Mock_Tests
 target_link_libraries(Mock_Tests
     ${CPPUTEST_LIBRARIES}/libCppUTest.a
     ${CPPUTEST_LIBRARIES}/libCppUTestExt.a
-    test_load
 	test_MockRegEdit
 	test_MockADC
 	test_zero_cross_detection

tests/MockTests.cpp

@@ -2,7 +2,6 @@
 
 
 //ImportTestGroups
-IMPORT_TEST_GROUP(test_load);
 IMPORT_TEST_GROUP(test_MockRegEdit);
 IMPORT_TEST_GROUP(test_MockADC);
 IMPORT_TEST_GROUP(test_zero_cross_detection);

tests/load/test_load.cpp

@@ -23,14 +23,9 @@ extern "C"
 
 TEST_GROUP(test_load)
 {
-    uint8_t adc_pin;
-    uint8_t load_pin;
     void setup()
     {
-        adc_pin = 4;
-        load_pin = 7;
-        MockADC_ZeroIndex();
-        Load_SoftResetDisabledLoads();
+
     }
     void teardown()
     {
@@ -44,143 +39,23 @@ TEST(test_load, LoadPass)
     CHECK_TRUE(true);
 }
 
-void setup_adc_expectations(uint8_t adc_pin)
+TEST(test_load, PortAHandlerSuccess)
 {
     mock().expectOneCall("ADC_Init")
-        .withUnsignedIntParameter("pin_num", adc_pin);
+        .withUnsignedIntParameter("pin_num", 4);
 
     mock().expectOneCall("ADC_Enable");
     mock().expectOneCall("ADC_ReadValue_Impl")
-        .withUnsignedIntParameter("pin_num", adc_pin);
+        .withUnsignedIntParameter("pin_num", 4);
+
     mock().expectOneCall("ADC_Disable");
-}
 
-void expect_porta_disabled(uint8_t load_pin)
-{
     mock().expectOneCall("RegEdit_ClearBit")
         .withPointerParameter("reg", (void *) &PORTA.OUT)
-        .withUnsignedIntParameter("bit_num", load_pin);
-}
-
-void expect_porta_enabled(uint8_t load_pin)
-{
-    mock().expectOneCall("RegEdit_SetBit")
-        .withPointerParameter("reg", (void *) &PORTA.DIR)
-        .withUnsignedIntParameter("bit_num", load_pin);
-
-    mock().expectOneCall("RegEdit_SetBit")
-        .withPointerParameter("reg", (void *) &PORTA.OUT)
-        .withUnsignedIntParameter("bit_num", load_pin);
-}
-
-void expect_portb_disabled(uint8_t load_pin)
-{
-    mock().expectOneCall("RegEdit_ClearBit")
-        .withPointerParameter("reg", (void *) &PORTB.OUT)
-        .withUnsignedIntParameter("bit_num", load_pin);
-}
-
-
-void expect_portb_enabled(uint8_t load_pin)
-{
-    mock().expectOneCall("RegEdit_SetBit")
-        .withPointerParameter("reg", (void *) &PORTB.DIR)
-        .withUnsignedIntParameter("bit_num", load_pin);
-
-    mock().expectOneCall("RegEdit_SetBit")
-        .withPointerParameter("reg", (void *) &PORTB.OUT)
-        .withUnsignedIntParameter("bit_num", load_pin);
-}
-
-TEST(test_load, PortAHandlerDisabledHigh)
-{
-    MockADC_PushValue(HIGHTHRESH);
-
-    setup_adc_expectations(adc_pin);
-    expect_porta_disabled(load_pin);
+        .withUnsignedIntParameter("bit_num", 7);
     
-    Load_HandleLoadPortA(adc_pin, load_pin);
-}
-
-TEST(test_load, PortAHandlerDisabledLow)
-{
-    MockADC_PushValue(LOWTHRESH);
-
-    setup_adc_expectations(adc_pin);
-    expect_porta_disabled(load_pin);
-    
-    Load_HandleLoadPortA(adc_pin, load_pin);
-}
-
-TEST(test_load, PortAHandlerEnabledWhenValid)
-{
-    MockADC_PushValue(HIGHTHRESH - 1);
-
-    setup_adc_expectations(adc_pin);
-    expect_porta_enabled(load_pin);
-
-    Load_HandleLoadPortA(adc_pin, load_pin);
-}
-
-TEST(test_load, PortAHandlerDisblesUntilPowerReset)
-{
-    MockADC_PushValue(HIGHTHRESH - 1);
-    MockADC_PushValue(HIGHTHRESH);
-
-    setup_adc_expectations(adc_pin);
-    expect_porta_disabled(load_pin);
-
-    setup_adc_expectations(adc_pin);
-    expect_porta_disabled(load_pin);
-
-    Load_HandleLoadPortA(adc_pin, load_pin);
-    Load_HandleLoadPortA(adc_pin, load_pin);
+    Load_HandleLoadPortA(4, 7);
 }
 
 
-
-TEST(test_load, PortBHandlerDisabledHigh)
-{
-    MockADC_PushValue(HIGHTHRESH);
-
-    setup_adc_expectations(adc_pin);
-    expect_portb_disabled(load_pin);
-    
-    Load_HandleLoadPortB(adc_pin, load_pin);
-}
-
-TEST(test_load, PortBHandlerDisabledLow)
-{
-    MockADC_PushValue(LOWTHRESH);
-
-    setup_adc_expectations(adc_pin);
-    expect_portb_disabled(load_pin);
-    
-    Load_HandleLoadPortB(adc_pin, load_pin);
-}
-
-TEST(test_load, PortBHandlerEnabledWhenValid)
-{
-    MockADC_PushValue(HIGHTHRESH - 1);
-
-    setup_adc_expectations(adc_pin);
-    expect_portb_enabled(load_pin);
-
-    Load_HandleLoadPortB(adc_pin, load_pin);
-}
-
-TEST(test_load, PortBHandlerDisblesUntilPowerReset)
-{
-    MockADC_PushValue(HIGHTHRESH - 1);
-    MockADC_PushValue(HIGHTHRESH);
-
-    setup_adc_expectations(adc_pin);
-    expect_portb_disabled(load_pin);
-
-    setup_adc_expectations(adc_pin);
-    expect_portb_disabled(load_pin);
-
-    Load_HandleLoadPortB(adc_pin, load_pin);
-    Load_HandleLoadPortB(adc_pin, load_pin);
-}
-
+//Need to setup a one-shot or way for it to only enable once.