Automated formatting to styling guideline

src/LedController/LedController.c

@@ -5,7 +5,6 @@
  * description: Abstract LED interface and control.
  */
 
-
 #ifndef __AVR_ATtiny404__
 #define __AVR_ATtiny404__
 #endif
@@ -22,17 +21,11 @@
 
 #define HALF_BYTE_BM
 
-typedef struct LedController {
-    void *port;
-    uint8_t pins[BITS_IN_BYTE];
-}LedController;
-
-static LedController controller;
 
+//static LedController controller;
 
 void LedControler_SetPortADefault(void);
 
-
 /*
  * Uses pins: 9, 8, 12, 13
  */
@@ -45,7 +38,6 @@ void LedController_SetLedBitNum(void * port, uint8_t pin, uint8_t bit);
 
 void LedController_ShowByte(uint8_t byte);
 
-
 void LedControler_ShowHalfByte(uint8_t byte)
 {
     byte = byte & 0x0F;
@@ -60,21 +52,24 @@ void LedControler_ShowHalfByte(uint8_t byte)
     // 15 = 0b1111
     // PORTA.OUT |= (byte & 0x0F);
 
-    if(byte & 0x01){
+    if (byte & 0x01)
+    {
         PORTA.OUT |= PA_B1;
     }
-    if(byte & 0x02){
+    if (byte & 0x02)
+    {
         PORTA.OUT |= PA_B2;
     }
-    if(byte & 0x04){
+    if (byte & 0x04)
+    {
         PORTA.OUT |= PA_B3;
     }
-    if(byte & 0x08){
+    if (byte & 0x08)
+    {
         PORTA.OUT |= PA_B4;
     }
 }
 
-
 void LedControler_ClearHalfByte(void)
 {
     // PORTA.OUT &= HALF_BYTE_BM;

src/LedController/LedController.h

@@ -10,8 +10,20 @@
 #ifndef LEDCONTROLLER
 #define LEDCONTROLLER
 
-
 #include <stdint.h>
+#include "stdbool.h"
+
+
+/**
+ * A structure representing an LED
+ */
+typedef struct Led 
+{
+    uint8_t *port;
+    uint8_t pin_num;
+    bool state;
+}Led;
+
 
 /**
  * Sets the default PORTB pins for output.
@@ -23,7 +35,6 @@ void LedControler_SetPortADefault(void);
  */
 void LedControler_SetPortBDefault(void);
 
-
 /**
  * Allows the setting or changing of which pins represent which bits.
  * @param port The address of the port.
@@ -37,13 +48,11 @@ void LedController_SetLedBitNum(void * port, uint8_t pin, uint8_t bit);
  */
 void LedController_ShowByte(uint8_t byte);
 
-
 /**
  * Displays the the first 4 bits of a byte.
  */
 void LedControler_ShowHalfByte(uint8_t byte);
 
-
 /**
  * Clears out the halfbyte led representation
  */

src/main.c

@@ -15,8 +15,8 @@
 // This can prevent issues with utils/delay.h library with the gcc toolchain
 #define __DELAY_BACKWARD_COMPATIBLE__
 
-#include "RegEdit.h"
 #include "LedController.h"
+#include "RegEdit.h"
 #include "config.h"
 #include "timer.h"
 #include <avr/cpufunc.h> /* Required header file */
@@ -28,7 +28,6 @@
 #define RELAYPIN (1 << 1)
 #define RELAYREADINGPIN (1 << 2) // It would be better to use PA7 so USART worked
 
-
 // Set the function pointer for the delay func
 void (*Delay_MicroSeconds)(double us) = _delay_us;
 
@@ -44,7 +43,6 @@ void SW2_Wait(void)
     while (PORTA.IN & SW2PIN) {}
 }
 
-
 void Activate_Relay(void)
 {
     PORTA.OUT |= RELAYPIN;
@@ -55,17 +53,21 @@ void Deactivate_Relay(void)
     PORTA.OUT &= ~RELAYPIN;
 }
 
-
 void WaitForRelayConnect(void)
 {
-    while(!(PORTB.IN & RELAYREADINGPIN)){;}
+    while (!(PORTB.IN & RELAYREADINGPIN))
+    {
+        ;
+    }
 }
 
 void WaitForRelayDisconnect(void)
 {
-    while(PORTB.IN & RELAYREADINGPIN){;}
+    while (PORTB.IN & RELAYREADINGPIN)
+    {
+        ;
+    }
 }
-
 
 int main(int argc, char **argv)
 {
@@ -74,12 +76,12 @@ int main(int argc, char **argv)
     PORTA.DIR &= ~SW1PIN;
     PORTA.DIR &= ~SW2PIN;
 
-
     uint16_t make_time  = 0;
     uint16_t break_time = 0;
     uint8_t  temp       = 0;
 
-    while(true) {
+    while (true)
+    {
         SW1_Wait();
         Activate_Relay();
 
@@ -130,8 +132,6 @@ int main(int argc, char **argv)
 
         LedControler_ClearHalfByte();
 
-
-
         /*
         USART0_sendString(maketime_msg);
         USART0_sendChar((uint8_t)(0xFF & make_time));

src/timer/timer.c

@@ -13,8 +13,8 @@
 #endif
 
 #include "timer.h"
-#include <avr/io.h>
 #include <avr/interrupt.h>
+#include <avr/io.h>
 
 #define FCLK_PER 3333333UL
 #define DIV8 0x3
@@ -26,10 +26,8 @@
 #define OVERHEAD_TWO 151
 #define OVERHEAD_THREE 75
 
-
 static uint16_t overflow_count = 0;
 
-
 uint16_t        Timer_GetOverflowCount(void)
 {
     return overflow_count;
@@ -61,7 +59,6 @@ void Timer_Start(void)
     TCA0.SINGLE.CTRLA |= TCA_SINGLE_ENABLE_bm;
 }
 
-
 void Timer_Disable(void)
 {
     cli();

src/timer/timer.h

@@ -10,15 +10,14 @@
 #ifndef TIMER
 #define TIMER
 
-#include "stdbool.h"
 #include "inttypes.h"
+#include "stdbool.h"
 
 /**
  *
  * @param a The first argument
  */
 
-
 void     Timer_Start(void);
 
 void     Timer_Disable(void);

src/usart/usart.c

@@ -5,7 +5,6 @@
  * description: module_purpose
  */
 
-
 #ifndef __AVR_ATtiny404__
 #define __AVR_ATtiny404__
 #endif
@@ -21,11 +20,9 @@
 // #define F_CPU 3333333UL
 // #define F_PER F_CPU / 6
 
-
 #define F_PER 3333333UL
 #define USART0_BAUD_RATE(BAUD_RATE) ((float)(F_PER * 64 / (16 * (float)BAUD_RATE)) + 0.5)
 
-
 // RX PIN6, TX PIN7
 // ALT: RX PIN12 TX PIN11
 void USART0_Init(void)
@@ -51,7 +48,6 @@ void USART0_Init(void)
 
 void USART0_Alt_Init(void)
 {
-
     // setup Alternate pints on PA1 and PA2
     PORTMUX.CTRLB |= PORTMUX_USART0_ALTERNATE_gc;
     PORTA.DIR |= (1 << 1);

src/usart/usart.h

@@ -15,7 +15,6 @@
  */
 void USART0_Init(void);
 
-
 /**
  * @brief Initializes the USART0 peripheral on Alternate pins.
  */