182 lines
3.1 KiB
C
182 lines
3.1 KiB
C
/*
|
|
* Author: Jake Goodwin
|
|
* Date: 2023
|
|
* Description: Small library to communicate with the AT-09 bluetooth module.
|
|
*/
|
|
|
|
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
#include <avr/sleep.h>
|
|
#include <util/delay.h>
|
|
#include "avr_usart.h"
|
|
|
|
|
|
//#############################
|
|
//Globals
|
|
//#############################
|
|
|
|
int main() {
|
|
unsigned char* tx_buffer[16];
|
|
unsigned char* rx_buffer[16];
|
|
|
|
led_blink();
|
|
led_blink();
|
|
led_blink();
|
|
_delay_ms(1000);
|
|
_delay_ms(1000);
|
|
|
|
init_usart0();
|
|
|
|
//enable interrupts
|
|
sei();
|
|
|
|
unsigned char data[] = "AT+WAKE";
|
|
|
|
while(1) {
|
|
_delay_ms(1000);
|
|
//led_blink();
|
|
for(uint8_t i = 0; i < 7; i++) {
|
|
tx_usart0(data[i]);
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
//#############################
|
|
//FUNCTIONS
|
|
//#############################
|
|
|
|
/*
|
|
* Input: None
|
|
* Output: None
|
|
* Description: init usart0 hardware in async mode
|
|
*/
|
|
void init_usart0(void) {
|
|
//DDRB |= (1<<TX_DDR)|(0<<RX_DDR);
|
|
//PORTD |= (0<<TX_PIN)|(0<<RX_PIN);
|
|
|
|
//setup stuff for usart communications.
|
|
|
|
//set baud rate, this is 9600Baud with a 8Mhz clock
|
|
//UBRR0H |= (uint8_t) (BT_UBRR>>8);
|
|
//UBRR0L |= (uint8_t) BT_UBRR;
|
|
UBRR0H |= (uint8_t) (0x33>>8);
|
|
UBRR0L |= (uint8_t) 0x33;
|
|
|
|
|
|
|
|
//Enable recv and Transmit pins, overrides other uses.
|
|
//IN the usart control and status register 0B
|
|
UCSR0B = (1<<RXEN0) | (1<<TXEN0);
|
|
|
|
//setting the data frame format
|
|
//We leave the 2MSB zero for async serial. And we also don't enable
|
|
//parity bits for now. We set a 2bit stop bit and 8bit char size.
|
|
UCSR0C = (1<<USBS0) | (3<<UCSZ00);
|
|
}
|
|
|
|
|
|
/*
|
|
* Input: a 8bit char
|
|
* Output: None
|
|
* Description: Sends a char over usart0
|
|
*/
|
|
void tx_usart0(unsigned char data) {
|
|
//first wait for the transmit buffer to be empty
|
|
while(!(UCSR0A & (1<<UDRE0))) {
|
|
;//Equiv of continue
|
|
}
|
|
|
|
//now that it's empty, fill buffer with TX data.
|
|
UDR0 = data;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Input:None
|
|
* Output: a 8bit char
|
|
* Description: Recvs a char over usart0
|
|
*/
|
|
unsigned char rx_usart0(void) {
|
|
//first wait for the data to be received.
|
|
while(!(UCSR0A & (1<<RXC0))) {
|
|
;//Equiv of continue
|
|
}
|
|
|
|
//now return the data
|
|
return (unsigned char) UDR0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Inupt: None
|
|
* Output: None
|
|
* Description:
|
|
*/
|
|
|
|
|
|
/*
|
|
* Inupt: None
|
|
* Output: None
|
|
* Description:
|
|
*/
|
|
|
|
|
|
/*
|
|
* Inupt: None
|
|
* Output: None
|
|
* Description:
|
|
*/
|
|
|
|
|
|
/*
|
|
* Inupt: None
|
|
* Output: None
|
|
* Description:
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
* Inupt: BUAD RATE as uint8_t
|
|
* Output: None
|
|
* Description: Sets the baud rate of the serial usart0
|
|
* VALUES @ 1Mhz:
|
|
* 207 --> 300bps
|
|
* 103 --> 600bps
|
|
* 51 --> 1200bps
|
|
* 25 --> 2400bps
|
|
* 12 --> 4800bps
|
|
* 6 --> 9600bps !!! 7% error rate
|
|
*/
|
|
|
|
void serial0_set_baud(uint8_t buad) {
|
|
UBRR0H |= (uint8_t) (baud>>8);
|
|
UBRR0L |= (uint8_t) baud;
|
|
}
|
|
|
|
|
|
/*
|
|
* Input: None
|
|
* Output: None
|
|
* Description: Toggles the pin for the LED indicator.
|
|
*/
|
|
static void led_blink(void) {
|
|
//Set the DDR for output.
|
|
DDRC |= (1<<LED_PIN);
|
|
|
|
PORTC ^= (1<<LED_PIN);
|
|
_delay_ms(250);
|
|
PORTC ^= (1<<LED_PIN);
|
|
_delay_ms(250);
|
|
|
|
}
|
|
|
|
|