added button code and methods

src/main.c

@@ -40,12 +40,37 @@ void motorMove(int direction);
 uint8_t readButton(void);
 
 
+static void InitBtn(btn_state *b, uint8_t input_pin, uint8_t output_pin);
+static void ToggleOutput(btn_state *b);
+static void ClearButtonTimer(btn_state *b);
+static void StartButtonTimer(btn_state *b);
+static void CheckButtonLongpress(btn_state *b);
+static void UpdateButtonInput(btn_state *b);
+static void UpdateButtonOutput(btn_state *b);
+
+
+
+
 //#############################
 //MAIN
 //#############################
 
 int main(int argc, char **argv)
 { 
+    InitProg();
+
+    uint16_t fader_pos = ReadADC() >> 2; // Scale 10-bit ADC to 8-bit (0-255)
+
+    while(1)
+    {
+        fader_pos = ReadADC() >> 2;
+
+        /*
+        UpdateButtonOutput(&btn1);
+        UpdateButtonInput(&btn1);
+        */
+    } 
+
 
     /*
     while(1) {
@@ -79,7 +104,7 @@ int main(int argc, char **argv)
 //#############################
 
 
-void init_prog(void)
+void InitProg(void)
 {
     /*Set the debounced state to all high*/
     debounced_state = 0xFF;
@@ -105,28 +130,142 @@ void init_prog(void)
 
     btn1.is_pressed = ((PINB & (1<<btn1.input_pin))  == 0);
 
-    /*This is to read if the user wants to change the saved states.*/
-    /*Manually read the current switch state*/
-    /*
-    if(btn1.is_pressed){
-        btn1.is_active = ! btn1.is_active;
-        eeprom_write_byte((uint8_t *)ROM_SS1_ADR, btn1.is_active);
-        blink_bypass1();
-    }
-    if(btn2.is_pressed){
-        btn2.is_active = ! btn2.is_active;
-        eeprom_write_byte((uint8_t *)ROM_SS2_ADR, btn2.is_active);
-        blink_bypass2();
+    InitTimer0(); 
 }
 
-    if(btn1.is_active){PORTB |= (1<<btn1.output_pin);}
-    if(btn2.is_active){PORTB |= (1<<btn2.output_pin);}
+
+uint16_t ReadADC(void);
+{
+    // Initialize ADC
+    ADMUX = (1 << MUX1) | (1 << MUX0); // Select ADC3 (PB3)
+    ADCSRA = (1 << ADEN) | (1 << ADPS1) | (1 << ADPS0); // Enable ADC, prescaler 8
+
+    ADCSRA |= (1 << ADSC); // Start conversion
+    while (ADCSRA & (1 << ADSC)); // Wait for conversion to finish
+    return ADC;
+}
+
+
+/*
+ * ############################
+ * Motor methods 
+ * ############################
  */ 
 
-    init_timer0(); 
+void MotorCoast(void)
+{
+    PORTB &= ~((1 << PWM_PIN1) | (1 << PWM_PIN2)); // Disable motor drive
 }
 
 
+/*
+ * ############################
+ * BUTTON methods 
+ * ############################
+ */ 
+
+/*This is kinda like our button constructor*/
+static void InitBtn(btn_state *b, uint8_t input_pin, uint8_t output_pin)
+{
+    b->is_long_pressed = 0;
+    b->is_pressed = 0;
+    b->is_bypassed = 0;
+    b->pressed_ticks = 0;
+    b->timer_enabled = 0;
+    b->input_pin = input_pin;
+    b->output_pin = output_pin;
+
+    /*Configure the buttons inputs and outputs*/
+    DDRB &= ~(1<<b->input_pin);
+    PORTB |= (1<<b->input_pin);
+    
+    DDRB |= (1<<b->output_pin);
+    PORTB &= ~(1<<b->output_pin);
+}
+
+/*This is the fancy function to toggle output pins*/
+static void ToggleOutput(btn_state *b)
+{
+    if(!b->is_bypassed){
+        b->is_bypassed = 1;
+        PORTB |= (1<<b->output_pin);
+    }
+    else{
+        b->is_bypassed = 0;
+        PORTB &= ~(1<<b->output_pin);
+    }
+}
+
+static void ClearButtonTimer(btn_state *b)
+{
+    b->timer_enabled = 0;
+    b->is_long_pressed = 0;
+    b->pressed_ticks = 0;
+}
+
+static void StartButtonTimer(btn_state *b)
+{
+    ClearButtonTimer(b);
+    b->timer_enabled = 1;
+}
+
+static void CheckButtonLongpress(btn_state *b)
+{
+    if(b->pressed_ticks >= LONG_PRESS_TICKS) {
+        b->is_long_pressed = 1;
+        b->timer_enabled = 0;
+    }
+}
+
+static void UpdateButtonInput(btn_state *b)
+{
+    /*Check from the global debounced port input*/
+    
+    /*check for pin HIGH*/
+    if(debounced_state & (1<<b->input_pin)) {
+        b->is_pressed = 0;
+    }
+    /*otherwise assume pin LOW*/
+    else{
+        b->is_pressed = 1;
+    }
+}
+
+static void UpdateButtonOutput(btn_state *b)
+{
+    /*If the button is actually pressed.*/
+    if(b->is_pressed){
+        
+        /*If this is a new event.*/
+        if(!b->is_long_pressed && !b->timer_enabled){
+            /*Then start the timer and update the output*/
+            ToggleOutput(b);
+            StartButtonTimer(b);
+            return;
+        }
+
+        /*If the timer is already going.*/
+        else if(b->timer_enabled){
+            /*Then just check if it's hit the threshold.*/
+            CheckButtonLongpress(b);
+            return;
+        }
+
+        else{
+            return;
+        }
+    }
+
+    /*Else the button was realeased*/
+    else if(!b->is_pressed){
+        /*If the button was released on a long press.*/
+        if(b->is_long_pressed){
+            ToggleOutput(b);
+        }
+        ClearButtonTimer(b);
+    }
+}
+
 
 /*
  * ############################
@@ -140,7 +279,8 @@ void init_prog(void)
  * DESCRIPTION: Updates the global debounced state. This function
  * should be called in a ISR a set rate using the hardware timer.
  */
-static inline void debounce_switch() {
+static inline void DebounceSwitch() 
+{
     uint8_t i, j;
     db_state[idx] = PINB & 0xFF;
     idx+=1;
@@ -159,7 +299,8 @@ static inline void debounce_switch() {
 
 
 /*Setup the timer0 on the AVR*/
-static inline void init_timer0() { 
+static inline void InitTimer0()
+{ 
     /*Zero out the tick_count var*/
     tick_count = 0;
 
@@ -190,7 +331,7 @@ ISR(TIM0_OVF_vect)
     cli();
 
     /*Check the state of the switches*/
-    debounce_switch();
+    DebounceSwitch();
 
     /*Update the tick_count*/
     if(btn1.timer_enabled && btn1.pressed_ticks <= UINT8_MAX){