Merge branch 'dev'

inc/main.h

@@ -32,8 +32,8 @@
 
 //Addresses in the eeprom for the two switch states 
 #define ROM_SP_ADR      0x0
-#define ROM_SS1_ADR     0x1
+#define POSITION1_ADR     0x1
-#define ROM_SS2_ADR     0x2
+#define POSITION2_ADR     0x2
 #define ROM_EP_ADR      0x3
 
 //Debounce check number.
@@ -89,7 +89,6 @@ typedef struct {
     uint8_t timer_enabled: 1;
     uint8_t pressed_ticks;
     uint8_t input_pin;
-    uint8_t output_pin;
 }btn_state; 
 
 

mocks/MockADC/MockADC.c

@@ -16,22 +16,16 @@ int fake_index = 0;
 static bool is_setup = false;
 
 
-
-void ADC_SetPin(uint8_t pin_num)
-{
-    return;
-}
-
 void ADC_Setup(void)
 {
     is_setup = true;
     return;
 }
 
-void ADC_Init(uint8_t pin_num)
+void ADC_Init(uint8_t adc_chan)
 {
     mock_c()->actualCall("ADC_Init")
-        ->withUnsignedIntParameters("pin_num", pin_num);
+        ->withUnsignedIntParameters("adc_chan", adc_chan);
 }
 
 void ADC_Enable(void)
@@ -44,10 +38,10 @@ void ADC_Disable()
     mock_c()->actualCall("ADC_Disable"); 
 }
 
-uint16_t ADC_ReadValue_Impl(uint8_t pin_num)
+uint16_t ADC_ReadValue_Impl(void)
 {
-    mock_c()->actualCall("ADC_ReadValue_Impl")
+    mock_c()->actualCall("ADC_ReadValue_Impl");
-        ->withUnsignedIntParameters("pin_num", pin_num);
+
 
     if(fake_index == 0){
         return 0;
@@ -55,7 +49,7 @@ uint16_t ADC_ReadValue_Impl(uint8_t pin_num)
     return fake_data[--fake_index];
 }
 
-uint16_t (*ADC_ReadValue)(uint8_t pin_num) = ADC_ReadValue_Impl;
+uint16_t (*ADC_ReadValue)(void) = ADC_ReadValue_Impl;
 
 
 void MockADC_PushValue(uint16_t value){

mocks/MockADC/MockADC.h

@@ -15,12 +15,11 @@
 
 
 void ADC_Setup(void);
-void ADC_SetPin(uint8_t pin_num);
+void ADC_Init(uint8_t adc_chan);
-void ADC_Init(uint8_t pin_num);
 void ADC_Enable(void);
 void ADC_Disable(void);
 
-extern uint16_t (*ADC_ReadValue)(uint8_t pin_num);
+extern uint16_t (*ADC_ReadValue)(void);
 
 void MockADC_PushValue(uint16_t value);
 void MockADC_ZeroIndex(void);

otto.sh

@@ -224,12 +224,19 @@ run_c_tests () {
     make AllTests && ./tests/AllTests -c -v
 }
 
+run_mock_tests () {
+    format_source_code 
+    clear_cmake_cache
+    cmake -DUNIT_TESTING=ON  -DCMAKE_VERBOSE_MAKEFILE=${CMAKE_VERBOSE} ../
+    make Mock_Tests && ./tests/Mock_Tests -c -v
+}
+
 print_menu () {
     echo "BUILD MENU:"
     echo "0. Add Mock Module"
     echo "1. Run Tests"
     echo "2. Build Project(hex)"
-    echo "3. User Option"
+    echo "3. Run MockTests"
     echo "4. Flash to AVR"
     echo "5. Add new module to project"
     echo "6. Delete module from project"
@@ -264,7 +271,7 @@ main() {
             3)
                 echo "You selected Option 3"
                 valid_choice=true
-                build_hex_optimized 
+                run_mock_tests 
                 ;;
             4)
                 echo "You selected Option 4"

src/ADC/ADC.c

@@ -13,15 +13,30 @@
 #include "RegEdit.h"
 #include "avr/io.h"
 
-#define MAX_PIN_NUM 7
+#define MAX_CHANNEL_NUM 3
 
-static bool IsInvalidPin(uint8_t pin_num) {
+static bool IsInvalidChannel(uint8_t adc_chan) {
-  if (pin_num > MAX_PIN_NUM) {
+  if (adc_chan > MAX_CHANNEL_NUM) {
     return true;
   }
   return false;
 }
 
+uint8_t ADC_GetChannelPinNum(uint8_t adc_chan) {
+  switch (adc_chan) {
+  case 0:
+    return PB5;
+  case 1:
+    return PB2;
+  case 2:
+    return PB4;
+  case 3:
+    return PB3;
+  default:
+    return 255; /*return invalid pin num.*/
+  }
+}
+
 void ADC_Setup(void) {
   // Clear the register, set VCC as ref, ADC0 as channel and
   // leave result right adjusted.
@@ -36,62 +51,61 @@ void ADC_Setup(void) {
   RegEdit_AND_Num((void *)&ADCSRB, (1 << ADTS2) | (0 << ADTS1) | (1 << ADTS0));
 }
 
-void ADC_Init(uint8_t pin_num) {
+void ADC_Init(uint8_t adc_chan) {
 
-  if (IsInvalidPin(pin_num)) {
+  if (IsInvalidChannel(adc_chan)) {
     return;
   }
 
+  // get the associated pin number.
+  uint8_t pin_num = ADC_GetChannelPinNum(adc_chan);
+
   // set the direction to input
-  // RegEdit_ClearBit((void *)&PORTA.DIR, pin_num);
+  RegEdit_ClearBit((void *)&DDRB, pin_num);
 
   // Disable the pull-up resistor
-  // RegEdit_ClearBit((void *)&PORTA.OUT, pin_num);
+  RegEdit_ClearBit((void *)&PORTB, pin_num);
 
-  // Disable input buffer
+  // Set the adc mux reg for our channel.
-  // We do some kinda nasty address addition but it saves
+
-  // memory and means we don't need a switch statment.
+  // Clear the existing mux bits.
-  // RegEdit_SetBit((void *)(&PORTA.PIN0CTRL) + pin_num,
+  RegEdit_AND_Num((void *)&ADMUX, 0xFC);
-  //               PORT_ISC_INPUT_DISABLE_gc);
+
+  // Set the correct bits
+  RegEdit_OR_Num((void *)&ADMUX, adc_chan);
 }
 
 void ADC_Enable(void) {
   // Set the enable bit in the CTRLA register
-  // RegEdit_SetBit((void *)&ADC0.CTRLA, 0);
+  RegEdit_SetBit((void *)&ADCSRA, ADEN);
 }
 
 void ADC_Disable() {
   // Clear the enable ADC flag
-  // RegEdit_ClearBit((void *)&ADC0.CTRLA, 0);
+  RegEdit_ClearBit((void *)&ADCSRA, ADEN);
 }
 
-void ADC_SetPin(uint8_t pin_num) {
+uint16_t ADC_ReadValue_Impl(void) {
-  if (IsInvalidPin(pin_num)) {
+
-    return;
+  // start conversion.
+  RegEdit_SetBit((void *)&ADCSRA, ADSC);
+
+  /* Wait until ADC conversion done or it times out. */
+  uint8_t cycles = 1;
+  while (1) {
+    if (!RegEdit_IsBitSet((void *)&ADCSRA, ADSC)) {
+      break;
+    }
+    // if It times out return an invalid value for a 12bit ADC.
+    else if (cycles >= ADC_WAIT_TIMEOUT) {
+      return UINT16_MAX;
+    }
+    cycles++;
   }
-  // RegEdit_ClearRegister((void *)&ADC0.MUXPOS);
-  // RegEdit_SetNum((void *)&ADC0.MUXPOS, pin_num);
-}
 
-uint16_t ADC_ReadValue_Impl(uint8_t pin_num) {
+  uint16_t val = ADC;
-  // RegEdit_SetNum((void *)&ADC0.COMMAND, ADC_STCONV_bm);
+  return val;
-
-  /* Wait until ADC conversion done */
-
-  /*
-   while (!(ADC0.INTFLAGS & ADC_RESRDY_bm)) {
-   ;
- }
- */
-
-  /* Clear the interrupt flag by writing 1: */
-  // ADC0.INTFLAGS = ADC_RESRDY_bm;
-
-  // uint16_t adc_val = (uint16_t)ADC0.RES;
-  uint16_t adc_val = 0;
-  adc_val = adc_val >> 5;
-  return adc_val;
 }
 
 // Set the default for the function pointer.
-uint16_t (*ADC_ReadValue)(uint8_t pin_num) = ADC_ReadValue_Impl;
+uint16_t (*ADC_ReadValue)(void) = ADC_ReadValue_Impl;

src/ADC/ADC.h

@@ -13,10 +13,16 @@
 #include <stdbool.h>
 #include <stdint.h>
 
+/**
+ * @brief The number of loop cycles it waits for ADC conversion before
+ * timing out.
+ */
+#define ADC_WAIT_TIMEOUT 16
+
 /**
  * @brief Initializes the AVR hardware in order to accept
  * Input for ADC usage.
- * @param pin_num The number of the pin 0-7 you are initializing.
+ * @param adc_chan The channel of the pin 0-7 you are initializing.
  *
  * This function only makes use of PORTA by default. It sets the direction
  * register to input, disables the pull-up resistor and also diables interrupts
@@ -25,7 +31,13 @@
  * This in turn helps reduce noise when using the ADC.
  *
  */
-void ADC_Init(uint8_t pin_num);
+void ADC_Init(uint8_t adc_chan);
+
+/**
+ * @brief Returns the pin number for the adc channel or 255 on an error.
+ * @param The ADC channel.
+ */
+uint8_t ADC_GetChannelPinNum(uint8_t adc_chan);
 
 /**
  * @brief Enables the ADC
@@ -40,12 +52,11 @@ void ADC_Disable();
 /**
  * @brief Reads ADC value into variable
  *
- * @param pin_num The bin number of the ADC pin being read.
  *
  * This function depends on the ADC already being initialized and enabled
  * before being called.
  */
-extern uint16_t (*ADC_ReadValue)(uint8_t pin_num);
+extern uint16_t (*ADC_ReadValue)();
 
 /**
  * @brief Sets up the ADC
@@ -58,11 +69,4 @@ extern uint16_t (*ADC_ReadValue)(uint8_t pin_num);
  */
 void ADC_Setup(void);
 
-/**
- * @brief Sets the pin used in the MUX for ADC0.
- *
- * @param pin_num The number of the pin in Port A.
- */
-void ADC_SetPin(uint8_t pin_num);
-
 #endif // ADC_H

src/CMakeLists.txt

@@ -3,7 +3,8 @@ add_executable(${PROJECT_NAME}
 )
 
 target_link_libraries(${PROJECT_NAME}
-    RegEdit
+    #RegEdit
+    #ADC
     #timer
 )
 

src/main.c

@@ -1,5 +1,4 @@
 #ifndef F_CPU
-#error "F_CPU not defined: defaulting to 9.6MHz"
 #define F_CPU 1200000UL
 #endif
 
@@ -34,7 +33,7 @@ volatile uint16_t tick_count;
 // #############################
 
 static inline void InitTimer0(void);
-static void InitBtn(btn_state *b, uint8_t input_pin, uint8_t output_pin);
+static void InitBtn(btn_state *b, uint8_t input_pin);
 static void ClearButtonTimer(btn_state *b);
 static void StartButtonTimer(btn_state *b);
 static void CheckButtonLongpress(btn_state *b);
@@ -51,7 +50,6 @@ int main() {
   while (1) {
     UpdateButtonOutput(&btn1);
     UpdateButtonInput(&btn1);
-    //MotorMoveTo(0);
   }
 
   return 0;
@@ -65,7 +63,7 @@ void InitProg(void) {
   /*Set the debounced state to all high*/
   debounced_state = 0xFF;
 
-  InitBtn(&btn1, BUTTON_PIN, PIN_ACTIVE1);
+  InitBtn(&btn1, BUTTON_PIN);
 
   /*Wait 5ms for pull-up resistors voltage to become stable.*/
   _delay_ms(5);
@@ -76,11 +74,11 @@ void InitProg(void) {
 
   // Checks against a bit pattern we defined to represent the start of data.
   if (eeprom_read_byte((uint8_t *)ROM_SP_ADR) == START_PATTERN) {
-    MotorMoveTo(eeprom_read_byte((uint8_t *)ROM_SS1_ADR));
+    MotorMoveTo(eeprom_read_byte((uint8_t *)POSITION1_ADR));
   } else {
     // otherwise we write the init values for the start pattern and states.
     eeprom_write_byte((uint8_t *)ROM_SP_ADR, START_PATTERN);
-    eeprom_write_byte((uint8_t *)ROM_SS1_ADR, 0x7F);
+    eeprom_write_byte((uint8_t *)POSITION1_ADR, 0x7F);
   }
 
   InitTimer0();
@@ -96,17 +94,18 @@ uint8_t ReadSpeed(void) {
   while (ADCSRA & (1 << ADSC)) {
   } // Wait for conversion to finish
 
-  uint8_t val = (uint8_t)(ADC >> 2);
+    //Normally a bitshift of 2 is done for 8bit ADC values,
-
+    //however we want to divide by two after this as well so we
-    //Map the speed value to the 100%-50% duty cycle range.
+    //do a third shift followed by an addition of 127 to yield a mapping of
-    //val = (uint8_t)( (float)val / 255.0 ) * 100;
+    //approximatly 50%-96.6% duty cycle range.
+    uint8_t val = (uint8_t)(ADC >> 3) + 127;
 
   return val;
 }
 
 // change to ReadFader(void)
 uint16_t ReadFader(void) {
-  // Initialize ADC
+    // Initialize ADC
   ADMUX = (1 << MUX1) | (1 << MUX0);                  // Select ADC3 (PB3)
   ADCSRA = (1 << ADEN) | (1 << ADPS1) | (1 << ADPS0); // Enable ADC, prescaler 8
 
@@ -129,21 +128,22 @@ static inline uint8_t diff(uint8_t a, uint8_t b) {
   return b - a;
 }
 
-void MotorSetSavePos() {
+void MotorSetSavePos(uint8_t *ADR) {
   uint8_t pos = (uint8_t)(ReadFader() >> 2);
-  eeprom_write_byte((uint8_t *)ROM_SS1_ADR, pos);
+  //eeprom_write_byte((uint8_t *)ADR, pos);
+  eeprom_update_byte((uint8_t *)ADR, pos);
   return;
 }
 
-uint8_t MotorGetSavedPos(void) {
+uint8_t MotorGetSavedPos(uint8_t *ADR) {
-  return (uint8_t)eeprom_read_byte((uint8_t *)ROM_SS1_ADR);
+  return (uint8_t)eeprom_read_byte((uint8_t *)POSITION1_ADR);
 }
 
 void MotorMoveTo(uint8_t target) {
 
   uint8_t on_delay = ReadSpeed();
   uint8_t pos = (uint8_t)(ReadFader() >> 2);
-  uint8_t idx =0;
+  uint8_t idx = 0;
 
   while (diff(target, pos) > 8) {
     on_delay = ReadSpeed();
@@ -159,7 +159,7 @@ void MotorMoveTo(uint8_t target) {
       _delay_us(MOTOR_PULSE);
     }
     MotorCoast();
-    for (;idx < 255; idx++) {
+    for (; idx < 255; idx++) {
       _delay_us(MOTOR_PULSE);
     }
   }
@@ -191,21 +191,17 @@ void MotorCoast(void) {
  */
 
 /*This is kinda like our button constructor*/
-static void InitBtn(btn_state *b, uint8_t input_pin, uint8_t output_pin) {
+static void InitBtn(btn_state *b, uint8_t input_pin) {
   b->is_long_pressed = 0;
   b->is_pressed = 0;
   b->is_active = 0;
   b->pressed_ticks = 0;
   b->timer_enabled = 0;
   b->input_pin = input_pin;
-  b->output_pin = output_pin;
 
   /*Configure the buttons inputs and outputs*/
   DDRB &= ~(1 << b->input_pin);
   PORTB |= (1 << b->input_pin);
-
-  DDRB |= (1 << b->output_pin);
-  PORTB &= ~(1 << b->output_pin);
 }
 
 static void ClearButtonTimer(btn_state *b) {
@@ -249,6 +245,7 @@ static void UpdateButtonOutput(btn_state *b) {
       /*Then start the timer and update the output*/
       // ToggleOutput(b);
       StartButtonTimer(b);
+
       return;
     }
 
@@ -268,12 +265,21 @@ static void UpdateButtonOutput(btn_state *b) {
   else if (!b->is_pressed) {
     /*If the button was released on a long press.*/
     if (b->is_long_pressed) {
-      MotorSetSavePos();
+      MotorSetSavePos((uint8_t *)POSITION1_ADR);
     }
     /*If the button pres was a short one.*/
     else if (!b->is_long_pressed) {
       if (b->is_active) {
-        MotorMoveTo(MotorGetSavedPos());
+          /*Save the current position into position 2 EEPROM*/
+          MotorSetSavePos((uint8_t *)POSITION2_ADR);
+
+            /*If already in saved position then go back to original pos.*/
+          if(diff(MotorGetSavedPos((uint8_t *)POSITION1_ADR), ReadFader()) > 8){
+                MotorMoveTo(MotorGetSavedPos((uint8_t *)POSITION1_ADR));
+          }
+          else{
+                MotorMoveTo(MotorGetSavedPos((uint8_t *)POSITION1_ADR));
+          }
       } else {
         MotorCoast();
       }

tests/ADC/test_ADC.cpp

@@ -73,116 +73,100 @@ TEST(test_ADC, ADC_SetupSetsRegisters)
     ADC_Setup();     
 }
 
-TEST(test_ADC, ADC_InitPortbADC3UsesCorrectRegisters)
+TEST(test_ADC, ADC_InitRejectsInvalidChannels)
 {
-    //PB3/ADC3
+    for(uint8_t i = 4; i < 255; i++){
-
+        ADC_Init(i);
-    //Check it disables the pin's digital circuitry
+    }
-    
-    //Check that the ADC pin is selected in ADMUX
-    
-
-    //
-
-    /*
-    //Check for setting the direction to input.
-    mock().expectOneCall("RegEdit_ClearBit")
-        .withPointerParameter("reg", (void *) &PORTA.DIR)
-        .withUnsignedIntParameter("bit_num", 7);
- 
-    //Check that the pullup is off 
-    mock().expectOneCall("RegEdit_ClearBit")
-        .withPointerParameter("reg", (void *) &PORTA.OUT)
-        .withUnsignedIntParameter("bit_num", 7);
-
-    //Set the ISC(input sense config) to disable digital input
-    //buffering and reduce the noise on ADC usage.
-    mock().expectOneCall("RegEdit_SetBit")
-        .withPointerParameter("reg", (void *) &PORTA.PIN7CTRL)
-        .withUnsignedIntParameter("bit_num", PORT_ISC_INPUT_DISABLE_gc);
-
-    */
-    ADC_Init(7);
 }
 
-TEST(test_ADC, ADC_InitPortAPin0UsesCorrectRegisters)
+
+TEST(test_ADC, ADC_InitPortbWorksWithValidChannels)
 {
-    /*
+    uint8_t pin_num;
-    //Check for setting the direction to input.
-    mock().expectOneCall("RegEdit_ClearBit")
-        .withPointerParameter("reg", (void *) &PORTA.DIR)
-        .withUnsignedIntParameter("bit_num", 0);
 
-    //Check that the pullup is off 
+    for(uint8_t adc_channel = 0; adc_channel <= 3; adc_channel++)
-    mock().expectOneCall("RegEdit_ClearBit")
+    {
-        .withPointerParameter("reg", (void *) &PORTA.OUT)
+        pin_num = ADC_GetChannelPinNum(adc_channel);
-        .withUnsignedIntParameter("bit_num", 0);
 
-    //Set the ISC(input sense config) to disable digital input
+        //Check it disables the pin's digital circuitry
-    //buffering and reduce the noise on ADC usage.
-    mock().expectOneCall("RegEdit_SetBit")
-        .withPointerParameter("reg", (void *) &PORTA.PIN0CTRL)
-        .withUnsignedIntParameter("bit_num", PORT_ISC_INPUT_DISABLE_gc);
 
-    */
+        //Check it sets the pin for input
-    //ADC_Init(0);
+        mock().expectOneCall("RegEdit_ClearBit")
+            .withPointerParameter("reg", (void *) &DDRB)
+            .withUnsignedIntParameter("bit_num", pin_num);
+
+
+        //Check that the pull-up resistor is disabled.
+        mock().expectOneCall("RegEdit_ClearBit")
+            .withPointerParameter("reg", (void *) &PORTB)
+            .withUnsignedIntParameter("bit_num", pin_num);
+
+
+        //Check that the ADC pin is selected in ADMUX
+
+        //Clears the last two bits first.
+        mock().expectOneCall("RegEdit_AND_Num")
+            .withPointerParameter("reg", (void *) &ADMUX)
+            .withUnsignedIntParameter("num", 0xFC);
+
+        //Selects the ADC pin/channel
+        mock().expectOneCall("RegEdit_OR_Num")
+            .withPointerParameter("reg", (void *) &ADMUX)
+            .withUnsignedIntParameter("num", adc_channel);
+
+        ADC_Init(adc_channel);
+    }
 }
 
-TEST(test_ADC, ADC_InitDoesNothingOnHighPinNumbers)
-{
-    //mock().expectNoCall("RegEdit_SetBit");
-    //ADC_Init(8);
-}
 
 TEST(test_ADC, ADC_EnablePasses)
 {
-    /*
-    mock().expectOneCall("RegEdit_SetBit")
-        .withPointerParameter("reg", (void *) &ADC0.CTRLA)
-        .withUnsignedIntParameter("bit_num", 0);
 
-    */
+    mock().expectOneCall("RegEdit_SetBit")
-    //ADC_Enable();
+        .withPointerParameter("reg", (void *) &ADCSRA)
+       .withUnsignedIntParameter("bit_num", ADEN); 
+
+    ADC_Enable();
 }
 
+
 TEST(test_ADC, ADC_DisablePasses)
 {
-    /*
     mock().expectOneCall("RegEdit_ClearBit")
-        .withPointerParameter("reg", (void *) &ADC0.CTRLA)
+        .withPointerParameter("reg", (void *) &ADCSRA)
-        .withUnsignedIntParameter("bit_num", 0);
+        .withUnsignedIntParameter("bit_num", ADEN);
-    */
+
-    //ADC_Disable();
+    ADC_Disable();
 }
 
-TEST(test_ADC, ADC_SetPinSetsRightRegisters)
+TEST(test_ADC, ADC_ReadValueImplimentationTimesOut)
 {
-    /*
+    //Expect the start conversion bit to be set.
-    //It clears existing MUXPOS register values.
+    mock().expectOneCall("RegEdit_SetBit")
-    mock().expectOneCall("RegEdit_ClearRegister")
+        .withPointerParameter("reg", (void *) &ADCSRA)
-        .withPointerParameter("reg", (void *) &ADC0.MUXPOS);
+        .withUnsignedIntParameter("bit_num", ADSC);
 
-    //It Correctly sets the pin number.
+    //Check that it can time out.
-    mock().expectOneCall("RegEdit_SetNum")
+   
-        .withPointerParameter("reg", (void *) &ADC0.MUXPOS)
+    //Expect it to read the start bit 
-        .withUnsignedIntParameter("num", 4);
+    mock().expectNCalls(ADC_WAIT_TIMEOUT, "RegEdit_IsBitSet")
-    */
+        .withPointerParameter("reg", (void *) &ADCSRA)
-    //ADC_SetPin(4);
+        .withUnsignedIntParameter("bit_num", ADSC);
+
+    //Check that it return the "error" value
+
+    uint16_t value = ADC_ReadValue();
+    CHECK_EQUAL_TEXT(UINT16_MAX, value, "ERROR: Should return UINT16_MAX!");
 }
 
 
-TEST(test_ADC, ADC_SetPinFailsOnInvalidPin)
+static uint16_t ADC_ReadValueFake()
-{
-    //ADC_SetPin(8);
-}
-
-
-static uint16_t ADC_ReadValueFake(uint8_t pin_num)
 {
     return 512;
 }
 
-TEST_GROUP(test_ADCRead)
+TEST_GROUP(test_ADCReadPtrSwap)
 {
     void setup()
     {
@@ -195,9 +179,9 @@ TEST_GROUP(test_ADCRead)
     }
 };
 
-TEST(test_ADCRead, FunctionPointerSwapWorks)
+TEST(test_ADCReadPtrSwap, FunctionPointerSwapWorks)
 {
-    uint16_t value = ADC_ReadValue(0);
+    uint16_t value = ADC_ReadValue();
     
     LONGS_EQUAL(512, value);
 }

tests/MockADC/test_MockADC.cpp

@@ -30,9 +30,9 @@ TEST_GROUP(test_MockADC)
 TEST(test_MockADC, ADC_InitExpects)
 {
     mock().expectOneCall("ADC_Init")
-        .withUnsignedIntParameter("pin_num", 7);
+        .withUnsignedIntParameter("adc_chan", 0);
 
-    ADC_Init(7);
+    ADC_Init(0);
 }
 
 TEST(test_MockADC, ADC_EnableExpects)
@@ -55,10 +55,9 @@ TEST(test_MockADC, ADC_ReadValue)
     MockADC_ZeroIndex();
     MockADC_PushValue(512);
  
-    mock().expectOneCall("ADC_ReadValue_Impl")
+    mock().expectOneCall("ADC_ReadValue_Impl");
-        .withUnsignedIntParameter("pin_num", 0x2);
 
-    uint16_t val = ADC_ReadValue(0x2);
+    uint16_t val = ADC_ReadValue();
     LONGS_EQUAL(512, val);
     
 }
@@ -68,10 +67,9 @@ TEST(test_MockADC, ADC_ReadValueReturnsZeroOnEmptyBuffer)
     MockADC_ZeroIndex();
     
     mock().expectOneCall("ADC_ReadValue_Impl")
-        .withUnsignedIntParameter("pin_num", 0x2)
         .andReturnValue(0x0000);
 
-    uint16_t val = ADC_ReadValue(0x2);
+    uint16_t val = ADC_ReadValue();
     LONGS_EQUAL(0, val);
 }