Relay_and_Socket_Protection/inc/config.h

61 lines
1.4 KiB
C

/**
* @file config.h
* @author Jake G
* @date 15 June 2024
* @brief File contains the project configuration values
*
* This file contains the user changable parameters. Most the values are
* constants that will change the behavior of the system.
*
* For these changes to take affect you must recompile/rebuild the project
* after you have changed the values.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include <stdint.h>
#define ADC_LOAD1 4
#define ADC_LOAD2 5
#define ADC_LOAD3 6
/**
* @brief Positive Zero Crossing Trigger Value
* The 10 bit value at which the program triggers the ISR to handle
* the zero crossing event.
*
* You can adjust this to change when the program will start the timer.
*/
const uint16_t TriggerValue = 512;
/**
* @brief Gate Pulse Quantity
*
* Contains the number of pulses that the micro-controller will send to the
* gates of the relays or triacs.
*
* This number should match the quantity of timings inside the pulse/duration
* array.
*/
const int GatePulsesQty = 5;
/**
* @brief Gate Pulses Array
*
* The gate pulses array holds the duration of pulses in microseconds for the
* triacs gates. The length of the array must be matched with the
* GatePulsesQuantity parameter.
*/
const uint16_t GatePulses[5] = {250, 500, 750, 1000, 1250};
/**
* @brief The time constant.
*/
const double Tau = 8250;
#endif //CONFIG_H