thermostat/tests/load/test_load.cpp

/*
 * Author: Jake G 
 * Date: 2024 
 * filename: test_load.cpp
 * description: 
 */

#include "CppUTest/CommandLineTestRunner.h"
#include "CppUTestExt/MockSupport.h"
#include <cstdint>


//This define allows us to dircetly include the device header without error.
#define _AVR_IO_H_

extern "C" 
{
#include <iotn404.h> //ATtiny404 header fille.
#include "load.h"
#include "MockADC.h"
}

TEST_GROUP(test_load)
{
    uint8_t adc_pin;
    uint8_t load_pin;
    void setup()
    {
        adc_pin = 4;
        load_pin = 7;
        MockADC_ZeroIndex();
        Load_SoftResetDisabledLoads();
    }
    void teardown()
    {
        mock().checkExpectations();
        mock().clear();
    }
};

TEST(test_load, LoadPass)
{
    CHECK_TRUE(true);
}

void setup_adc_expectations(uint8_t adc_pin)
{
    mock().expectOneCall("ADC_Init")
        .withUnsignedIntParameter("pin_num", adc_pin);

    mock().expectOneCall("ADC_Enable");
    mock().expectOneCall("ADC_ReadValue_Impl")
        .withUnsignedIntParameter("pin_num", adc_pin);
    mock().expectOneCall("ADC_Disable");
}

void expect_porta_disabled(uint8_t load_pin, bool output_level)
{
    mock().expectOneCall("RegEdit_IsBitSet")
        .withPointerParameter("reg", (void *) &PORTA.OUT)
        .withUnsignedIntParameter("bit_num", load_pin)
        .andReturnValue(output_level);

    mock().expectOneCall("RegEdit_ClearBit")
        .withPointerParameter("reg", (void *) &PORTA.OUT)
        .withUnsignedIntParameter("bit_num", load_pin);
}

void expect_porta_enabled(uint8_t load_pin, bool output_level)
{
    mock().expectOneCall("RegEdit_IsBitSet")
        .withPointerParameter("reg", (void *) &PORTA.OUT)
        .withUnsignedIntParameter("bit_num", load_pin)
        .andReturnValue(output_level);

    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &PORTA.DIR)
        .withUnsignedIntParameter("bit_num", load_pin);

    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &PORTA.OUT)
        .withUnsignedIntParameter("bit_num", load_pin);
}

void expect_portb_disabled(uint8_t load_pin, bool output_level)
{
    mock().expectOneCall("RegEdit_IsBitSet")
        .withPointerParameter("reg", (void *) &PORTB.OUT)
        .withUnsignedIntParameter("bit_num", load_pin)
        .andReturnValue(output_level);

    mock().expectOneCall("RegEdit_ClearBit")
        .withPointerParameter("reg", (void *) &PORTB.OUT)
        .withUnsignedIntParameter("bit_num", load_pin);
}


void expect_portb_enabled(uint8_t load_pin, bool output_level)
{
    mock().expectOneCall("RegEdit_IsBitSet")
        .withPointerParameter("reg", (void *) &PORTB.OUT)
        .withUnsignedIntParameter("bit_num", load_pin)
        .andReturnValue(output_level);

    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &PORTB.DIR)
        .withUnsignedIntParameter("bit_num", load_pin);

    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &PORTB.OUT)
        .withUnsignedIntParameter("bit_num", load_pin);
}

TEST(test_load, PortAHandlerDisabledHigh)
{
    MockADC_PushValue(HIGHTHRESH);

    setup_adc_expectations(adc_pin);
    expect_porta_disabled(load_pin, true);
    
    Load_HandleLoadPortA(adc_pin, load_pin);
}

TEST(test_load, PortAHandlerDisabledLow)
{
    MockADC_PushValue(LOWTHRESH);

    setup_adc_expectations(adc_pin);
    expect_porta_disabled(load_pin, false);
    
    Load_HandleLoadPortA(adc_pin, load_pin);
}

TEST(test_load, PortAHandlerEnabledRisingEdgeLO)
{
    //Start from the rising edge.
    MockADC_PushValue(HYSTERESIS_LO - 1);

    setup_adc_expectations(adc_pin);
    expect_porta_enabled(load_pin, false);

    Load_HandleLoadPortA(adc_pin, load_pin);
}

TEST(test_load, PortAHandlerEnabledRisingEdgeHI)
{
    //Start from the rising edge above lo.
    MockADC_PushValue(HYSTERESIS_HI - 1);

    setup_adc_expectations(adc_pin);
    expect_porta_enabled(load_pin, true);

    Load_HandleLoadPortA(adc_pin, load_pin);
}

TEST(test_load, PortAHandlerDisabledAboveTarget)
{
    MockADC_PushValue(HYSTERESIS_HI + 1);

    setup_adc_expectations(adc_pin);
    expect_porta_disabled(load_pin, true);

    Load_HandleLoadPortA(adc_pin, load_pin);
}

TEST(test_load, PortAHandlerDisablesUntilPoweReset)
{
    MockADC_PushValue(HYSTERESIS_HI - 1);
    MockADC_PushValue(HIGHTHRESH);

    setup_adc_expectations(adc_pin);
    expect_porta_disabled(load_pin, true);

    setup_adc_expectations(adc_pin);
    expect_porta_disabled(load_pin, false);

    Load_HandleLoadPortA(adc_pin, load_pin);
    Load_HandleLoadPortA(adc_pin, load_pin);
}


TEST(test_load, PortBHandlerDisabledHigh)
{
    MockADC_PushValue(HIGHTHRESH);

    setup_adc_expectations(adc_pin);
    expect_portb_disabled(load_pin, true);
    
    Load_HandleLoadPortB(adc_pin, load_pin);
}

TEST(test_load, PortBHandlerDisabledLow)
{
    MockADC_PushValue(LOWTHRESH);

    setup_adc_expectations(adc_pin);
    expect_portb_disabled(load_pin, false);
    
    Load_HandleLoadPortB(adc_pin, load_pin);
}


TEST(test_load, PortBHandlerEnabledRisingEdgeLO)
{
    //Start from the rising edge.
    MockADC_PushValue(HYSTERESIS_LO - 1);

    setup_adc_expectations(adc_pin);
    expect_portb_enabled(load_pin, false);

    Load_HandleLoadPortB(adc_pin, load_pin);
}

TEST(test_load, PortBHandlerEnabledRisingEdgeHI)
{
    //Start from the rising edge.
    MockADC_PushValue(HYSTERESIS_HI - 1);

    setup_adc_expectations(adc_pin);
    expect_portb_enabled(load_pin, true);

    Load_HandleLoadPortB(adc_pin, load_pin);
}

TEST(test_load, PortBHandlerDisableFallingEdgeLO)
{
    //Start from the falling edge.
    MockADC_PushValue(HYSTERESIS_LO + 1);

    setup_adc_expectations(adc_pin);
    expect_portb_disabled(load_pin, false);

    Load_HandleLoadPortB(adc_pin, load_pin);
}

TEST(test_load, PortBHandlerDisableFallingEdgeHI)
{
    //Start from the falling edge.
    MockADC_PushValue(HYSTERESIS_HI + 1);

    setup_adc_expectations(adc_pin);
    expect_portb_disabled(load_pin, false);

    Load_HandleLoadPortB(adc_pin, load_pin);
}

TEST(test_load, PortBHandlerDisablesUntilPoweReset)
{
    MockADC_PushValue(HYSTERESIS_HI - 1);
    MockADC_PushValue(HIGHTHRESH);

    setup_adc_expectations(adc_pin);
    expect_portb_disabled(load_pin, true);

    setup_adc_expectations(adc_pin);
    expect_portb_disabled(load_pin, false);

    Load_HandleLoadPortB(adc_pin, load_pin);
    Load_HandleLoadPortB(adc_pin, load_pin);
}