thermostat/tests/ADC/test_ADC.cpp

/*
 * Author: Jake G 
 * Date: 2024 
 * filename: test_ADC.c
 * description: module_purpose
 */

#include "CppUTest/CommandLineTestRunner.h"
#include "CppUTestExt/MockSupport.h"
#include <cstdint>

//This define allows us to dircetly include the device header without error.
#define _AVR_IO_H_


extern "C" 
{
#include <iotn404.h> //ATtiny404 header fille.
#include "ADC.h"
}

TEST_GROUP(test_ADC)
{
    void setup()
    {

    }
    void teardown()
    {
        mock().checkExpectations();
        mock().clear();
    }
};

TEST(test_ADC, FirstTest)
{
   CHECK(true);
}


TEST(test_ADC, ADC_SetupSetsRegisters)
{
    //Clears control register A for ADC0
    mock().expectOneCall("RegEdit_SetNum")
        .withPointerParameter("reg", (void *) &ADC0.CTRLA)
        .withUnsignedIntParameter("num", 0x00);

    //Sets The sample accumulation number to 32.
    mock().expectOneCall("RegEdit_SetNum")
        .withPointerParameter("reg", (void *) &ADC0.CTRLB)
        .withUnsignedIntParameter("num", 0x5);

    //Sets the voltage reference to VDD or VCC.
    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &ADC0.CTRLC)
        .withUnsignedIntParameter("bit_num", 4);

    //Sets the pre-scalar for the adc sample rate.
    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &ADC0.CTRLC)
        .withUnsignedIntParameter("bit_num", 2);

    //Setup an Initalization delay.
    mock().expectOneCall("RegEdit_OR_Num")
        .withPointerParameter("reg", (void *) &ADC0.CTRLD)
        .withUnsignedIntParameter("num", (2<<5));

    //Set the bit for ADC variation during readings.
    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &ADC0.CTRLD)
        .withUnsignedIntParameter("bit_num", 4);

    ADC_Setup();     
}

TEST(test_ADC, ADC_InitPortAPin7UsesCorrectRegisters)
{
    //Check for setting the direction to input.
    mock().expectOneCall("RegEdit_ClearBit")
        .withPointerParameter("reg", (void *) &PORTA.DIR)
        .withUnsignedIntParameter("bit_num", 7);
 
    //Check that the pullup is off 
    mock().expectOneCall("RegEdit_ClearBit")
        .withPointerParameter("reg", (void *) &PORTA.OUT)
        .withUnsignedIntParameter("bit_num", 7);

    //Set the ISC(input sense config) to disable digital input
    //buffering and reduce the noise on ADC usage.
    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &PORTA.PIN7CTRL)
        .withUnsignedIntParameter("bit_num", PORT_ISC_INPUT_DISABLE_gc);


    ADC_Init(7);
}

TEST(test_ADC, ADC_InitPortAPin0UsesCorrectRegisters)
{

    //Check for setting the direction to input.
    mock().expectOneCall("RegEdit_ClearBit")
        .withPointerParameter("reg", (void *) &PORTA.DIR)
        .withUnsignedIntParameter("bit_num", 0);
 
    //Check that the pullup is off 
    mock().expectOneCall("RegEdit_ClearBit")
        .withPointerParameter("reg", (void *) &PORTA.OUT)
        .withUnsignedIntParameter("bit_num", 0);

    //Set the ISC(input sense config) to disable digital input
    //buffering and reduce the noise on ADC usage.
    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &PORTA.PIN0CTRL)
        .withUnsignedIntParameter("bit_num", PORT_ISC_INPUT_DISABLE_gc);


    ADC_Init(0);
}

TEST(test_ADC, ADC_InitDoesNothingOnHighPinNumbers)
{
    mock().expectNoCall("RegEdit_SetBit");
    ADC_Init(8);
}

TEST(test_ADC, ADC_EnablePasses)
{

    mock().expectOneCall("RegEdit_SetBit")
        .withPointerParameter("reg", (void *) &ADC0.CTRLA)
        .withUnsignedIntParameter("bit_num", 0);

    ADC_Enable();

}

TEST(test_ADC, ADC_DisablePasses)
{
    mock().expectOneCall("RegEdit_ClearBit")
        .withPointerParameter("reg", (void *) &ADC0.CTRLA)
        .withUnsignedIntParameter("bit_num", 0);

    ADC_Disable();
}

TEST(test_ADC, ADC_SetPinSetsRightRegisters)
{
    //It clears existing MUXPOS register values.
    mock().expectOneCall("RegEdit_ClearRegister")
        .withPointerParameter("reg", (void *) &ADC0.MUXPOS);

    //It Correctly sets the pin number.
    mock().expectOneCall("RegEdit_SetNum")
        .withPointerParameter("reg", (void *) &ADC0.MUXPOS)
        .withUnsignedIntParameter("num", 4);

    ADC_SetPin(4);
}


TEST(test_ADC, ADC_SetPinFailsOnInvalidPin)
{
    ADC_SetPin(8);
}


static uint16_t ADC_ReadValueFake(uint8_t pin_num)
{
    return 512;
}

TEST_GROUP(test_ADCRead)
{
    void setup()
    {
        UT_PTR_SET(ADC_ReadValue, ADC_ReadValueFake);
    }

    void teardown()
    {

    }
};

TEST(test_ADCRead, FunctionPointerSwapWorks)
{
    uint16_t value = ADC_ReadValue(0);
    
    LONGS_EQUAL(512, value);
}