fg004_a1/config.h

94 lines
1.8 KiB
C
Raw Normal View History

/**
* @file config.h
* @author Jake G
* @date 15 June 2024
* @brief File contains the project configuration values
*
* This file contains the user changable parameters. Most the values are
* constants that will change the behavior of the system.
*
* For these changes to take affect you must recompile/rebuild the project
* after you have changed the values.
*/
#ifndef CONFIG_H
#define CONFIG_H
//#define __AVR_ATtiny404__
#include <stdint.h>
//#include <avr/io.h>
//#define ZC_PORT_DIR &PORTA.DIR
//*ZCP_DIR = &PORTA.DIR;
/**
* @brief Result type for the returned values from functions
*
*/
typedef enum ResultEnum{
OK,
Err
}ResultEnum;
/**
* @brief The type for Triac gate duration(micro seconds)
*
*/
typedef uint16_t DurationUs_t;
/**
* @brief Positive Zero Crossing Trigger Value
* The 10 bit value at which the program triggers the ISR to handle
* the zero crossing event.
*
* You can adjust this to change when the program will start the timer.
*/
const uint16_t TriggerValue = 512;
/**
* @brief Triac Gate Pulse Quantity
*
* Contains the number of pulses that the micro-controller will send to the
* gates of the triac.
*
* This number should match the quantity of timings inside the pulse/duration
* array.
*/
const int GatePulsesQty = 5;
/**
* @brief Gate Pulses Array
*
* The gate pulses array holds the duration of pulses in microseconds for the
* triacs gates. The length of the array must be matched with the
* GatePulsesQuantity parameter.
*/
const uint16_t GatePulses[5] = {250, 500, 750, 1000, 1250};
/**
* @brief Low Threshold
*
*/
const uint16_t LowThresh = 527;
/**
* @brief High Threshold
*
*/
const uint16_t HighThresh = 1000;
/**
* @brief The time constant.
*/
const double Tau = 8250;
#endif //CONFIG_H