README.md

@@ -14,8 +14,6 @@
 1. Clone/copy the repo locally.
 2. Check the requirements to make sure you're development enviroment is ready.
 3. Update the linker script files to target your current uC.
-4. Change line 45 of `Doxyfile` with the project name.
-5. 
 
 ## Running Tests
 
@@ -27,5 +25,3 @@
 - [ ] Add messages for case where tool-chain is missing.
 - [ ] Check for FreeBSD & Linux compat.
 - [ ] Add in RTOS stuff.
-
-

example.ld

@@ -1,63 +0,0 @@
-/* Define the memory regions: Flash and RAM */
-MEMORY
-{
-  FLASH (rx)  : ORIGIN = 0x08000000, LENGTH = 64K
-  RAM   (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
-}
-
-/* Define entry point (usually the reset handler defined in startup code) */
-ENTRY(Reset_Handler)
-
-/* Define the sections of the program */
-SECTIONS
-{
-  /* Code section, mapped to Flash memory */
-  .text :
-  {
-    KEEP(*(.isr_vector))        /* Vector table, which must be at the beginning of Flash */
-    *(.text)                    /* All code goes here */
-    *(.rodata)                  /* Read-only data (e.g., const variables) */
-    _etext = .;                 /* Mark the end of text section */
-  } > FLASH
-
-  /* Initialized data section, copied from Flash to RAM at startup */
-  .data : 
-  {
-    _sdata = .;                 /* Start of data section */
-    *(.data)                    /* Initialized data */
-    _edata = .;                 /* End of data section */
-  } > RAM AT > FLASH
-
-  /* Uninitialized data section, placed in RAM but not stored in Flash */
-  .bss :
-  {
-    _sbss = .;                  /* Start of BSS */
-    *(.bss)                     /* Uninitialized data */
-    *(COMMON)                   /* Common symbols (zero-initialized) */
-    _ebss = .;                  /* End of BSS */
-  } > RAM
-
-  /* Stack section */
-  ._stack : 
-  {
-    . = ALIGN(8);               /* Align to 8-byte boundary */
-    _estack = .;                /* End of stack (top of the stack) */
-    . = . + 2048;               /* Reserve 2 KB for stack */
-    _sstack = .;                /* Start of stack */
-  } > RAM
-
-  /* Heap section */
-  .heap :
-  {
-    _sheap = .;                 /* Start of heap */
-    . = . + 2048;               /* Reserve 2 KB for heap */
-    _eheap = .;                 /* End of heap */
-  } > RAM
-}
-
-/* Provide symbols to be used in the startup code */
-PROVIDE(_stack_start = _sstack);
-PROVIDE(_stack_end = _estack);
-PROVIDE(_heap_start = _sheap);
-PROVIDE(_heap_end = _eheap);
-

linker.ld

@@ -37,22 +37,11 @@ MEMORY
 floating_point = 0;
 SECTIONS
 {
-    /* Code section, mapped to Flash memory */
+    . = 0x10000;
-    .tect :
+    .text : { *(.text) }
-    {
+    . = 0x8000000;
-        KEEP(*(.isr_vector))    /* Vector table, which must be at the beginning of Flash*/
+    .data : { *(.data) }
-        *(.text)                /* All code goes here */
+    .bss : { *(.bss) }
-        *(.rodata)              /* Read-only data (e.g., const vars) */
-        _etext = .;             /* Mark the end of text section */
-    } > FLASH
-
-    /* Initialized data section, copied from Flash to RAM on startup. */
-    .data :
-    {
-        _sdata = .;                 /* Start of data section */
-        *(.data)                    /* Initialized data */
-        _edata = .;                 /* End of data section */
-    } > RAM AT > FLASH
 }