README.md

@@ -2,7 +2,7 @@
 
 ## Description
 
-This embedded firmware is the High Power mode for the software.
+This embedded firmware is the High Power mode for the triac software.
 
 ### Micro Controller Pins
 
@@ -111,4 +111,6 @@ Some stuff that still needs done.
 - [X] Write tests for ADC Mock
 - [X] Write ZCD using ADC Mock.
 - [X] Write ADC version for ATtiny404
+- [X] Add Triac module.
+- [X] Add Triac tests.
 

otto.sh

@@ -257,10 +257,10 @@ run_c_tests () {
     cmake -DUNIT_TESTING=ON  -DCMAKE_VERBOSE_MAKEFILE=${CMAKE_VERBOSE} ../
     make AllTests 
     make Mock_Tests
-    make EnTests 
+    make TriacTests
     ./tests/AllTests -v -c 
     ./tests/Mock_Tests -v -c
-    ./tests/EnTests -v -c
+    ./tests/TriacTests -v -c
 }
 
 print_menu () {

src/CMakeLists.txt

@@ -5,7 +5,7 @@ add_executable(${PROJECT_NAME}
 target_link_libraries(${PROJECT_NAME}
     RegEdit
     ADC
-    EnOut
+    TriacOut
     zero_cross_detection 
     load
     Enable
@@ -54,5 +54,5 @@ add_subdirectory(zero_cross_detection)
 add_subdirectory(ADC)
 add_subdirectory(RegEdit)
 add_subdirectory(usart)
-add_subdirectory(EnOut)
+add_subdirectory(TriacOut)
 add_subdirectory(Enable)

src/EnOut/CMakeLists.txt

@@ -1,17 +0,0 @@
-add_library(EnOut STATIC
-    EnOut.c
-)
-
-target_include_directories(EnOut PUBLIC
-    ${CMAKE_CURRENT_LIST_DIR}
-)
-
-if(UNIT_TESTING)
-    target_link_libraries(EnOut
-        MockRegEdit    
-    )
-else()
-    target_link_libraries(EnOut
-        RegEdit    
-    )
-endif()

src/TriacOut/CMakeLists.txt

@@ -0,0 +1,17 @@
+add_library(TriacOut STATIC
+    TriacOut.c
+)
+
+target_include_directories(TriacOut PUBLIC
+    ${CMAKE_CURRENT_LIST_DIR}
+)
+
+if(UNIT_TESTING)
+    target_link_libraries(TriacOut
+        MockRegEdit    
+    )
+else()
+    target_link_libraries(TriacOut
+        RegEdit    
+    )
+endif()

src/TriacOut/TriacOut.c

@@ -1,7 +1,7 @@
 /*
  * Author: username
  * Date: todays_date 
- * filename: EnOut.c
+ * filename: TriacOut.c
  * description: module_purpose
  */
 #ifndef __AVR_ATtiny404__
@@ -10,29 +10,29 @@
 
 
 #include <avr/io.h>
-#include "EnOut.h"
+#include "TriacOut.h"
 #include "RegEdit.h"
 
 
-void EnOut_InitTimerA(void)
+void TriacOut_InitTimerA(void)
 {
 
 }
 
-void EnOut_SetupPins(void)
+void TriacOut_SetupPins(void)
 {
     RegEdit_SetBit((void *) &PORTA.DIR, G1);
 }
 
 
-void EnOut_SetAllHigh(void)
+void TriacOut_SetAllHigh(void)
 {
     RegEdit_SetBit((void *) &PORTA.OUT, G1);
 }
 
 
 
-void EnOut_PulsePins(uint16_t pulse_time)
+void TriacOut_PulsePins(uint16_t pulse_time)
 {
     Delay_MicroSeconds(pulse_time);
 

src/TriacOut/TriacOut.h

@@ -4,11 +4,11 @@
  * @author username
  * @date todays_date
  * @copyright None
- * @file EnOut.h
+ * @file TriacOut.h
  */
 
-#ifndef ENOUT_H 
-#define ENOUT_H 
+#ifndef TRIACOUT_H 
+#define TRIACOUT_H 
 
 #include <stdint.h>
 
@@ -31,18 +31,18 @@ extern void (*Delay_MicroSeconds)(double us);
  * This function turns off G1, G2 and G3, once the passed time in micro seconds
  * has elapsed the pins are all set to low.
  */
-void EnOut_PulsePins(uint16_t pulse_time);
+void TriacOut_PulsePins(uint16_t pulse_time);
 
 /**
  * This sets up the G1, G2 and the G3 pins for output.
  */
-void EnOut_SetupPins(void);
+void TriacOut_SetupPins(void);
 
 /**
  * This sets G1, G2 and G3 to high on the output.
  */
-void EnOut_SetAllHigh(void);
+void TriacOut_SetAllHigh(void);
 
 
 
-#endif //ENOUT_H
+#endif //TRIACOUT_H

src/main.c

@@ -18,7 +18,7 @@
 #include "RegEdit.h"
 #include "zero_cross_detection.h"
 #include "ADC.h"
-#include "EnOut.h"
+#include "TriacOut.h"
 #include "load.h"
 #include "Enable.h"
 #include <avr/cpufunc.h> /* Required header file */
@@ -52,7 +52,6 @@ int main(int argc, char **argv)
         
         while(true){
             //Enable pins are enabled(set high) if the ADCLOAD value is valid.
-            _delay_us(Tau);
             Load_HandleLoadPortA(ADC_LOAD1, EN1);
             Load_HandleLoadPortB(ADC_LOAD2, EN2);
             Load_HandleLoadPortB(ADC_LOAD3, EN3);

tests/CMakeLists.txt

@@ -9,7 +9,7 @@ add_subdirectory(MockRegEdit)
 add_subdirectory(RegEdit)
 add_subdirectory(simple_test)
 add_subdirectory(zero_cross_detection)
-add_subdirectory(EnOut)
+add_subdirectory(TriacOut)
 add_subdirectory(load)
 
 
@@ -43,12 +43,12 @@ target_link_libraries(Mock_Tests
 )
 
 
-add_executable(EnTests
-    EnTests.cpp
+add_executable(TriacTests
+    TriacTests.cpp
 )
 
-target_link_libraries(EnTests
+target_link_libraries(TriacTests
     ${CPPUTEST_LIBRARIES}/libCppUTest.a
     ${CPPUTEST_LIBRARIES}/libCppUTestExt.a
-    test_EnOut
+    test_TriacOut
 )

tests/TriacOut/CMakeLists.txt

@@ -1,12 +1,12 @@
 # TEST_RUNNER
-add_library(test_EnOut
-    test_EnOut.cpp    
+add_library(test_TriacOut
+    test_TriacOut.cpp    
 )
 
-target_link_libraries(test_EnOut
+target_link_libraries(test_TriacOut
     ${CPPUTEST_LIBRARIES}/libCppUTest.a
     ${CPPUTEST_LIBRARIES}/libCppUTestExt.a
     MockRegEdit
-    EnOut
+    TriacOut
 )
 

tests/TriacOut/test_TriacOut.cpp

@@ -1,7 +1,7 @@
 /*
  * Author: username
  * Date: todays_date 
- * filename: test_EnOut.c
+ * filename: test_TriacOut.c
  * description: module_purpose
  */
 
@@ -14,7 +14,7 @@
 extern "C" 
 {
 #include <iotn404.h>
-#include "EnOut.h"
+#include "TriacOut.h"
 #include "MockRegEdit.h"
 }
 
@@ -27,7 +27,7 @@ void FakeDelay(double us)
 void (*Delay_MicroSeconds)(double us) = FakeDelay;
 
 
-TEST_GROUP(test_EnOut)
+TEST_GROUP(test_TriacOut)
 {
     void setup()
     {
@@ -40,13 +40,13 @@ TEST_GROUP(test_EnOut)
     }
 };
 
-TEST(test_EnOut, FirstTest)
+TEST(test_TriacOut, FirstTest)
 {
    //FAIL("Fail me!");
    CHECK(true);
 }
 
-TEST(test_EnOut, EnOut_SetupPins)
+TEST(test_TriacOut, TriacOut_SetupPins)
 {
     //Expect that pin PA1 is set to output
     mock().expectOneCall("RegEdit_SetBit")
@@ -54,21 +54,21 @@ TEST(test_EnOut, EnOut_SetupPins)
         .withUnsignedIntParameter("bit_num", G1);
 
 
-    EnOut_SetupPins();
+    TriacOut_SetupPins();
 }
 
 
-TEST(test_EnOut, EnOut_SetAllHigh)
+TEST(test_TriacOut, TriacOut_SetAllHigh)
 {
     //Expect that pin PA1 is set to output
     mock().expectOneCall("RegEdit_SetBit")
         .withPointerParameter("reg", (void *) &PORTA.OUT)
         .withUnsignedIntParameter("bit_num", G1);
 
-    EnOut_SetAllHigh();
+    TriacOut_SetAllHigh();
 }
 
-TEST(test_EnOut, EnOut_PulsePins)
+TEST(test_TriacOut, TriacOut_PulsePins)
 {
 
     //Expect that pin PA1 is set to output
@@ -76,5 +76,5 @@ TEST(test_EnOut, EnOut_PulsePins)
         .withPointerParameter("reg", (void *) &PORTA.OUT)
         .withUnsignedIntParameter("bit_num", G1);
 
-    EnOut_PulsePins(1000);
+    TriacOut_PulsePins(1000);
 }

tests/TriacTests.cpp

@@ -1,6 +1,6 @@
 #include "CppUTest/CommandLineTestRunner.h"
 
-IMPORT_TEST_GROUP(test_EnOut);
+IMPORT_TEST_GROUP(test_TriacOut);
 
 
 //START: main